Standard Models
16589: Die cast zinc alloy
16509: Stainless Steel
Hazardous Area Model - Intrinsically Safe (IS)
16579: Die cast zinc alloy
The requirements of Directive 94/9/EC, the ATmosphere EXplosives ATEX Directive have been met.
Apparatus Certificate Number: BAS02ATEX1001
System Certificate Number: Baseefa08Y0078 Certified to:
ATEX: 
II 1 G
CENELEC/IEC: Ga Ex ia IIC T4; Zones 0, 1, 2
Ex II 1 G Ga Ex ia IIC T4
Zones 0, 1, 2Zones 0, 1, 2
Hazardous Area Models - Flameproof (Exd)
16519: Copper free aluminium alloy - Colour Red
16219: Copper free aluminium alloy - High Temperature up to 85°C - Colour Red
16549: Stainless Steel - Colour Natural
Baseefa ATEX Certificate No: Baseefa08ATEX0270
Baseefa IECEx Certificate No: IECEx BAS 08.0073
Ex II 2GD Ex d IIC T4 Gb
Ex tb IIIC T135ºC Db IP66 A21 (Tamb -40ºC to +125ºC)
Stainless Steel Housing
These flame detectors give excellent immunity to false flame sources both indoors or out. They have internal self-test sources that check the detector’s operation when remotely instructed.
They can operate on a conventional 2-wire (14-28 Vdc) fire systems or 4-20mA process control systems. Relay contacts are also available for Fire and Fault signals. The detectors’ operating modes can be user selected giving a choice of alarm currents, response times, latching or non-latching outputs and sensitivity. The detectors have a maximum ambient operating temperature of 55°C.
Key Features
- Excellent immunity to false sources
- Suitable for indoor and outdoor areas
- Detects invisible flames from fuels such as Hydrogen and other inorganic fuels
- Selectable response speed
- Optical self-test
- Low power consumption
- Approved to EN54-10:2002
Applications
- Atria
- Coal Handling
- Pharmaceuticals
- Printing
- Spray Booths
- Nuclear Industry
- Waste Tips
- Storage Tanks
- Tunnels
| Talentum Triple IR Brochure |
| Talentum Triple IR User Manual (English) | ||
| Talentum Triple IR User Manual (Deutsch) | ||
| Talentum Triple IR User Manual (Français) | ||
| FM User Guide for Standard and Exd Units |
| Flame Detection - Which detector should I choose? |
Talentum® Dual IR (IR2)
Flame Detector Range
Talentum® UV/IR2
Flame Detector Range
No videos to show.
Latest blogs
-
Aviation Extinguishers - All You Need To Know
Wed, 04/04/2018 - 09:46
Hello and welcome to this month's blog, where this time we put the spotlight on our aviation extinguisher division.
-
Vibration Switches - All you need to know
Mon, 05/03/2018 - 15:27
What are they?
Fireray
Talentum
Looking for something specific?
To save or print the document of interest, please click here to be redirected to our
ffeACADEMY
Safety first!
Test your Talentum
You should test and ensure your entire flame detection system’s integrity at least once per year.
That means performing a full system loop test from the detector, through the wiring to the controller and up to the actual alarm notification at the fire panel.