Flame Sensor Test Unit

- Simulated Flame Detector Test Unit

Jump to:

Flame Sensor Test Unit

Part No. 16091

This test unit has been designed to generate a wide range of optical output signals. Flame sensors for fire detection and flame monitoring applications can be activated and tested.

Most optical flame sensors respond to Ultra Violet (UV) and or InfraRed (IR) radiation emitted from flames during combustion. Many sensors also use flame flicker techniques to distinguish between flames and other optical false sources.

The test unit simulates the flickering flame signal by modulating the output of a filament lamp. The thermal time constant of a filament lamp prevents the generation of a perfect flame flicker signal. The slow response of the filament lamp will mean that some flame sensors many require more time to activate under test than they would with a real flame.

The unit is intended for service engineers to use, when performing commissioning and routine maintenance.

Key Features

  • Wide Spectral Output - UV, Visible, Near IR, Mid-IR
  • Tests many Flame Sensors Types UV, UV/IR, UV/IR², IR³, IR², IR
  • Portable with Rechargeable NiCd Battery Pack and Charger
  • Selectable Optical Output Type
  • Constant Illumination
  • Regular Flashing Sources (Range of Frequencies)
  • Irregular Flickering Sources (Resembling Flames)
  • Selectable Optical Output Intensity with LED Bar Graph Indication
  • Range typically 3 metres and beyond
  • 30 Second Timeout on Each Test
  • Auxiliary 24Vdc Supply for Testing

 

 

Datasheet
Talentum Flame Sensor Tester Unit 16091

No accessories to show.

No videos to show.

Latest blogs

Fireray

What do you need for good ideas? #FFEinnovation https://t.co/RBqw9EvyuY
With Fireray 5000, you can check on the beam and its event log from the low level controller. It's easy ☕️ #Noclimb https://t.co/WEreBzGKbV

Talentum

What do you need for good ideas? #FFEinnovation https://t.co/dfvBmbimAx
RT @BLOODHOUND_SSC: #BLOODHOUNDisGo Book tickets to see BLOODHOUND run for the 1st time - 30th October #Newquay2017 https://t.co/8hX36UAZU…
RT @Fireray_FFE: Want to know more about our products? Join @RbarkerBob at SAF-COM tomorrow for his training session on @Fireray_FFE & @Tal